Your vehicle details
Your vehicle details
Make: Toyota
Model: Celica
Engine:
1.8
Year: 2001
Fuel: petrol
Filter products
CC
Cam
Cylinders
Valves
Trans
Model
Product Type
Description
Engine Code
Brands
Vehicle data is for guidance only. If unsure, please contact your local branch before ordering.
Bosch OXYGEN SENSOR
0258986602
In Stock
Bosch OXYGEN SENSOR
This Bosch OXYGEN SENSOR fits the following vehicles
- Celica 1.8 ZZT230 10/99-03/06
- Celica 1.8 ZZT231 10/00-03/06
| Model | Celica 1.8 ZZT230 |
|---|---|
| Description | Lambda Sensor |
| Engine Code | 1ZZFE, 2ZZGE |
| BHP | 140, 189 |
| Frequency | Connector/Clamp: Connector may need adjustment, Replace interval: 160000km |
| Part Detail | Diagnostic Probe, Universal, Fitting position: After catalytic converter, Number of circuits: 4, Regulating Sensor, Universal, Fitting position: Before catalytic converter, Number of circuits: 4, Regulating Sensor, Universal, Fitting position: Before catalytic converter, Number of circuits: 4 |
| Size mm | 0258006432, 0258986622, 0258986660 |
| Thread Note | LS602 |
£85.07
£70.89 ex VAT
Lucas 13300 LAMBDA SENSOR
LEB250
In Stock
Lucas 13300 LAMBDA SENSOR
This Lucas 13300 LAMBDA SENSOR fits the following vehicles
- Celica 1.8 ZZT230 10/99-03/06
- Celica 1.8 ZZT231 10/00-03/06
- Celica 1.8 ZZT231 10/00-08/04
| Model | Celica 1.8 ZZT230 |
|---|---|
| Description | Lambda Sensor, Universal Oxygen Sensor, Lambda Sensor, Universal Oxygen Sensor |
| Engine Code | 1ZZFE, 2ZZGE |
| BHP | 140, 189 |
| Size mm | Cable L.: 290, Cable L.: 290;H.:23;L.:360;W.:25, Cable L.: 290, Cable L.: 290;H.:23;L.:360;W.:25 |
| Part Detail | Switching-type Oxygen Sensor;4 Pins, Lambda Sensor;Tech. Note: Sensor Type:Planar;No. of Pins: 4, Switching-type Oxygen Sensor;4 Pins, Lambda Sensor;Tech. Note: Sensor Type:Planar;No. of Pins: 4 |
| Part Note | 0.116kg;0.14kg, Part Status: Yes, 0.116kg;0.14kg, Part Status: Yes |
| Fitment | In Front and Post Cat, In Front of Catalyst |
£64.21
£53.51 ex VAT
In Stock
Lucas 51181_OIL PRESSURE SWITCH
This Lucas 51181_OIL PRESSURE SWITCH fits the following vehicles
- Celica 1.8 ZZT230 10/99-03/06
- Celica 1.8 ZZT231 10/00-03/06
| Model | Celica 1.8 ZZT230 |
|---|---|
| Description | Oil Pressure Switch |
| Engine Code | 1ZZFE, 2ZZGE |
| BHP | 140, 189 |
| Size mm | Spanner Size: 24;Thread Size: 1/8 inch BSP Taper |
| Part Detail | 1 Pins |
| Vehicle Detail | Tech. Note: Circuit N.C. |
| Part Note | Part Status: Yes;Switch Pressure: 0,2 bar;Net weight:0.038kg |
| Colour | Black Housing |
| Fitment Detail | round Connector |
£8.24
£6.87 ex VAT